IP Addresses --

For SST: 128.195.161.237

For CalTeach: 128.200.135.190


For Windows:

Driver download: 

http://support.ricoh.com/bb/html/dr_ut_e/re2/model/imc4510/imc4510.htm?lang=en

  1. If Your operating system isn't auto selected, choose "Windows" and your Version of Windows from the list on screen. 
  2. Download the PCL6 Driver
  3. Run the installer when downloaded
  4. Agree to the EULA
  5. Choose Network setup method
  6. Click "Click if you cannot find the device" button
  7. With "Specify device IP Address" selected, Click Next
  8. Enter the IP address -  See above  - and click "Search"
  9. Click the "Manually enter information" checkbox
  10. Select the printer and click Next
  11. Change the Printer Name to something you prefer, ex: CalTeach Ricoh or SST Ricoh
  12. Optionally, Comment may be whatever you wish
  13. Optionally, you may de-select the "Make Default Printer" checkbox
  14. Click Finish


For MacOS:

Driver download: 

http://support.ricoh.com/bb/html/dr_ut_e/re2/model/imc4510/imc4510.htm?lang=en

  1. If Your operating system isn't auto selected, choose "Mac OS X" and your Version of MacOS from the list on screen -- this will most likely be the "Monterey" or "Ventura" 
  2. Download the PPD Driver
  3. Open and run the PKG
  4. Accept the terms and clickthrough the installer. It will ask for an administrator password at one point. 
  5. When done, you may close the installer.
  6. Open System Preferences
  7. Goto "Printers & Scanners" 
  8. Click the Add Printer button
    1. Monterey and before: Click the "+" button on bottom left, if grayed out, click the Lock icon on bottom left and enter admin password. then perform this step
    2. If Ventura, Click "Add Printer, Scanner, Fax..." in bottom right
  9. Click "IP" button in top center
  10. Enter The IP above Into the "Address:" field
  11. Set Protocol to "Internet Printer Protocol - IPP"
  12. When form is done searching the "Use:" field should be "Ricoh IM C4510 PS"
  13. Change name to something you prefer, ex: CalTeach Ricoh or SST Ricoh
  14. Optional, change location to something meaningful
  15. Click Add

To Add Staples in Mac

  1. In the Printers and Scanners Menu
  2. With the printer selected, click "Options & Supplies" and goto the "Options" Tab
  3. Change Finisher to "Finisher SR3320"
  4. Click OK